Hermes rewind is the new picker in Hermes Agent v0.23.0 that sends you back to any earlier prompt so you can either rewrite it or split off a fresh session from just before it.
It shipped on 5 November 2026 in the Hearth Release, and it lives in the terminal: the TUI and the classic CLI.
Below is the exact setup I would follow, the keys that matter, and the traps that catch people on day one.
If you want my team to look at how your agents are wired, get your Backlink Gameplan, or try Polar Rank free for 3 days.
What You Need Before Hermes Rewind Will Open
Three things have to be true.
First, you are on v0.23.0 or later.
Second, you are typing into the TUI or the classic CLI, not Desktop and not a chat app.
Third, in the TUI the session runs on the shared gateway; without it, the TUI replies that /rewind needs the shared gateway (hermes serve).
The classic CLI now attaches to the gateway by default this cycle, so most CLI users meet that last condition without doing anything, as the CLI guide explains.
Step 1: Update And Confirm The Version
Run the updater from your shell:
hermes update
The v0.23.0 notes say the updater now asks before it stashes anything and no longer touches untracked folders it never needed.
When it finishes, open a TUI or CLI session and type a few messages so the picker has something to list.
A brand-new session with nothing sent shows nothing to rewind to.
Step 2: Open The Picker Without Losing A Draft
You have two ways in: type /rewind, or press Esc twice.
The double Esc only opens the picker when Hermes is idle and the prompt box is empty.
If there is a half-written message in the box, Esc Esc throws that draft away instead.
If Hermes is still working, Esc interrupts the running turn.
So my rule is simple: clear or park the draft first.
In the classic CLI, Ctrl+S parks the current draft on a stack and brings it back when you press it again on an empty prompt, which the CLI guide documents in its key table.
After a discard in the CLI, the Up arrow recalls the text, so a slip is recoverable.
Step 3: Read The Picker Before You Press Anything
The list shows your own earlier prompts, newest at the top, with a preview of the highlighted one.
Arrow keys move the highlight.
In the TUI the chat view jumps to whichever prompt is highlighted and tags it, which shows the exact spot you are about to return to.
The hint line at the bottom reads: up/down select, Enter edit and resend, f fork from here, Esc close.
One limit to know: a prompt that carried an image appears by number only and cannot be chosen.
The classic CLI calls the same screen the backtrack picker, so search for that word if you are reading the CLI docs.
🔥 Want the session habits that keep long agent runs clean? Inside the AI Profit Boardroom you get step-by-step video trainings, the installable Agent OS, four coaching calls a week, and 3,400+ members comparing their Hermes setups. → Join the AI Profit Boardroom
Step 4: Edit And Resend To Undo A Wrong Turn
Highlight the prompt that sent things sideways and press Enter.
The text drops back into the composer, ready to change.
Rewrite it, then press Enter again.
At that moment Hermes cuts the current session back to just before that prompt and sends your new version as a fresh turn.
The chosen prompt and every turn after it are archived, the same soft delete that /undo uses.
Nothing is cut until you actually send.
Back out with Esc, Ctrl+C or an empty submit and the session stays as it was.
The slash-command reference spells this out in its /rewind row, including the note that the later messages are archived as with /undo.
Step 5: Fork With f To Try A Second Approach
Highlight a prompt and press f instead of Enter.
Hermes creates a new session holding everything before that prompt.
The prompt itself waits in the composer, filled in but not sent.
Your original session is left alone.
This is the move when you want both versions.
Change the waiting prompt, send it, and you now have two sessions that share the same start and differ from that point on.
Forking the very first prompt has no history to copy, so it simply opens a fresh session with that prompt prefilled.
Step 6: Skip The Picker With /rewind N And /rewind fork N
Once you know the number of the prompt you want, the picker is optional.
/rewind 3 # edit prompt 3 directly
/rewind fork 3 # fork a new session from just before prompt 3
The numbers match the picker list.
I use the numbered form when I already scrolled the transcript and know where the conversation went wrong.
Name Every Fork Before You Forget Which Is Which
Forks pile up fast, and two sessions that start with the same messages look alike in a list.
Right after you fork and send, give the new session a title:
/title Client B outline
The slash-command reference lists /title for exactly this, and the sessions guide says a named session is easy to find later with /resume plus the name or in the /sessions picker.
I also title the original before I fork, so the pair reads as A and B instead of two untitled rows.
Do this every time and comparing the two runs a week later takes one search instead of guesswork.
Where The Archived Turns Actually Go
Edit and resend does not erase anything from disk.
The sessions guide says exported files include every stored message with its active and compacted flags, and that covers messages removed by rewind or edit.
Treat the cut as a change to what the agent sees next, not as a way to make words disappear.
If something private went into the chat, use the export and prune tools the sessions guide describes rather than a rewind.
Rewind Next To /undo, /branch, /compress, /new And /rollback
These six commands get mixed up, so here is how I keep them apart, read from the docs at the v0.23.0 tag.
| Command | What it changes | Use it when |
|---|---|---|
/rewind (Enter) | Cuts the current session back to before the chosen prompt and sends your edit | An older prompt was wrong and you want one clean line of history |
/rewind (f) or /rewind fork N | New session with history before the prompt; original untouched | You want to keep the first attempt and try another |
/undo | Removes the last user and assistant exchange | Only the latest turn was the problem |
/branch (alias /fork) | Independent copy of the whole current session | You want a copy from where you are now, not from earlier |
/compress | Summarises older context to free room | The session is long, not wrong |
/new | Starts an empty session | The next job has nothing to do with this one |
/rollback | Restores files from checkpoints | The agent changed files and you want them back |
For the long-session case, I wrote up how the summariser works in Hermes compaction; rewind and compaction solve different problems and work fine side by side.
The File-Change Trap
Rewind rewrites the conversation only.
If the agent edited files, ran a script or saved a document after the prompt you rewind to, those changes stay on disk.
The tool for files is /rollback, and the checkpoints guide says checkpoints are opt-in: start with hermes chat --checkpoints or set checkpoints.enabled: true in config.
Switch that on before a session where you expect to rewind, so both the chat and the files can go back.
📞 Want a second pair of eyes on your agent setup? Get your Backlink Gameplan and my team will walk through how your agents, sessions and site content fit together, or try Polar Rank free for 3 days. Backlink Gameplan or try Polar Rank free for 3 days
Three Small-Business Runs, Step By Step
A hair salon fixing a reminder brief
- Prompt 2 asked Hermes for appointment reminder texts but forgot the salon's no-show policy wording.
- Press Esc twice on the empty prompt and highlight prompt 2.
- Press Enter, add the policy line to the brief, press Enter again.
- Hermes archives prompt 2 onward and writes the reminders again from the corrected brief.
An agency drafting a variant for a second client
- A session built a content outline for one dental client over several turns.
- Type
/rewind fork 4to branch from just before the prompt that named the client. - In the prefilled prompt, swap in the second client's name, town and services, then send.
- Both outlines now exist in separate sessions, and the first client's session is unchanged.
A plumber testing two follow-up email tones
- Hermes drafted a friendly follow-up for past customers in prompt 3.
- Highlight prompt 3 and press
f. - Change "friendly" to "short and direct" in the waiting prompt and send.
- Compare the two sessions and keep the version that sounds like the business.
Gotchas I Would Check First
- Esc Esc with text in the box deletes the text, so empty the box first.
- Esc while Hermes is mid-turn interrupts the turn instead of opening anything.
- Image prompts cannot be picked.
- Rewind leaves files alone, so pair it with checkpoints when the agent writes to disk.
- In the TUI, a missing shared gateway blocks the command.
- Archived turns still appear in exports.
There is a bonus in the same release.
TUI approval prompts gain a choice called "No, and tell Hermes what to do instead", which denies the command and steers your typed instruction into the running turn in one step.
When a command is close but wrong, that often beats rewinding.
Where Rewind Does Not Work Yet
The pull request that added it keeps /rewind and the Esc Esc picker in the terminal.
Desktop already had its own edit-and-resend and a message-level branch, which the fork key reuses under the hood.
Rewinding from messaging platforms such as Telegram or Slack is still listed as later work, and so is the new deny-and-redirect choice on Desktop.
Because one gateway now owns each session, a conversation you rewind in the terminal is the same conversation the other surfaces show.
🔥 Get the full Hermes playbook, not just one command. Inside the AI Profit Boardroom you get the installable Agent OS, step-by-step video trainings on Hermes sessions and skills, and four live coaching calls every week. → Join the AI Profit Boardroom
If you would rather have my team plan the rollout with you, get your Backlink Gameplan and bring your current Hermes setup, or try Polar Rank free for 3 days.
FAQ: Hermes Rewind
Why does Esc Esc not open the rewind picker?
It only opens when Hermes is idle and the prompt box is empty. With a draft typed it discards the draft, and while Hermes is working Esc interrupts the turn.
Does edit and resend delete the later messages?
It archives them, the same soft delete /undo uses. They drop out of the active session but still appear in session exports.
What is the difference between pressing Enter and pressing f in the picker?
Enter edits the prompt and, once you send, cuts the current session back to before it. f creates a new session from just before the prompt and leaves the original untouched.
Will rewind undo files the agent changed?
No. Rewind changes the conversation only. Use /rollback with checkpoints switched on to restore files.
Can I use /rewind in Telegram or Slack?
Not yet. The command is terminal-only in v0.23.0, and messaging-platform rewind is listed as later work.
📺 Video notes + links to the tools 👉
🎥 Learn how I make these videos 👉
🆓 Get a FREE AI Course + Community + 1,000 AI Agents 👉
About Julian
I'm Julian Goldie, an SEO entrepreneur, author and founder of the AI Profit Boardroom, which has 3,400+ members.
I help business owners scale with AI agents, automation and SEO.
- I've built a 7-figure SEO and link building agency, Goldie Agency, with a team of 70+ SEO experts.
- I've grown a YouTube channel to 400,000+ subscribers.
- I wrote "Link Building Mastery".
- My Udemy courses have taught over 29,000 students.
→ Get my best AI training inside the AI Profit Boardroom
Update today, park your draft, press Esc twice, and when the setup feels right get your Backlink Gameplan, try Polar Rank free for 3 days, or join the AI Profit Boardroom to keep going with Hermes rewind.











